Tuning file 12647136 12655492 55594893 for OPEL / SATURN / VAUXHALL ADAM 1.4L 16V TURBO 112kW/150HP DELCO E78

This engine is produced by 2015 with a power of 152 HP (112 KW) Electronic management is entrusted to a control unit DELCO model E78.

Diagnostic port location: OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU location: ECU located in the engine bay behind/close to the battery. Difficulty: easy

ECU firmware identification data

Hardware number: 12647136
Software number: 12655492
Software update version: 55594893

You are about to purchase a file for the 12647136 12655492 55594893 control unit installed on OPEL / SATURN / VAUXHALL ADAM. To ensure accurate and fast service, we ask you to provide the vehicle's license plate or chassis number. This will help us uniquely identify your vehicle and prepare the correct file.

Vehicle license plate or identification Required
Available services:
- Aggiornamento firmware (livello 1)
  Versione aggiornata del firmware con migliore efficienza del motore in termini di potenza e consumi.
  List of tables found in this firmware, the file you will receive will have changes in some of them, but not all, the most important ones:
  
  Anticipo accensione motore in funzione della temperatura
  Anticipo al minimo
  Lambda/AFR a pieno carico
  Anticipo ottimale
  Anticipo correzione in funzione del sensore ECT
  Anticipo richiesto - alti ottani
  Anticipo richiesto - bassi ottani
  Pressione turbo
  Calcolo carico motore desiderato
  Fasatura variabile albero a camme in scarico 2
  Fasatura variabile albero a camme in scarico
  ECT per attivazione ventola
  Giri motore al minimo
  Giri motore al minimo in modalità Parcheggio
  Fasatura variabile albero a camme in aspirazione 2
  Fasatura variabile albero a camme in aspirazione
  Limitatore di coppia 2
  Limitatore di coppia
  Arricchimento Lambda - open loop
  Limitatore di coppia per 1ª marcia
  Limitatore di coppia per 2ª marcia
  Limitatore di coppia per 3ª marcia
  Limitatore di coppia per 4ª marcia
  Limitatore di coppia per 5ª marcia
  Gestione angolo farfalla
  WG duty cycle in funzione di RPM e turbo
- Soluzione FAP
  Versione aggiornata del firmware che risolve i problemi del filtro anti particolato presente nei motori diesel e gli errori ad esso connessi.
- Soluzione DTC
  Versione aggiornata del firmware con la rimozione degli errori in formato Pxxxx, richiesta lettura dei codici tramite diagnosi.
- Soluzione LAMBDA
  Versione aggiornata del firmware che risolve i problemi relativi alla sonda lambda che controlla il catalizzatore.
- Soluzione EVAP
  Versione aggiornata del firmware che risolve i problemi relativi al sistema di controllo delle emissioni evaporative.
How the service works:

After payment, a support ticket will automatically be created in your account. Our technicians will process your request as quickly as possible, providing assistance and the file directly via ticket.

Delivery times

Delivery times vary from 10 to 60 minutes depending on the complexity of the job. We also work on weekends and sometimes overnight. Our time zone is GMT+1. Our files are handcrafted, tested, and guaranteed; we do not use automated software.

Refund Policy

Refunds are not available if the instructions received via ticket are not followed due to lack of tools and/or cooperation. Sharing or reselling our files is prohibited. For any issues, please write in the ticket before making any decisions.

File size

The files provided are partial and are not suitable for benchtop programmers (which require full files). If you require a full file, you will need to attach the complete reading of your ECU to the ticket that will be created after payment. We will use your file structure to ensure maximum compatibility.

Format and compatibility

Our files are in .BIN format and are compatible with popular programming tools such as Kess, New Genius, and Autotuner. They must be written with the same programmer used to read them.

Important

The provided files cannot be used to change the firmware version of the control unit or to restore the operation of a control unit if the firmware has been corrupted or deleted.
You need to register or login to proceed!